Shared ladder program

Ladder logic: 4 rungs with XIC, XIO, OTE

A runnable ladder logic program with 4 rungs using XIC, XIO, OTE, OTL, OTU. Open it in the free browser PLC simulator to edit, run and fork it. No install, no account.

Open a blank sandbox
RUNG 1Oven_TempAtSetpointExhaust_Fan_RunningDoor_Confirmed_ClosedOven_FaultLatchOven_Zone_ReadyRUNG 2Oven_Zone_ReadyHMI_OvenStartLOven_Cycle_ActiveRUNG 3HMI_OvenStopUOven_Cycle_ActiveRUNG 4Oven_Cycle_ActiveProduct_Feed_Enable
Static preview of the shared program. The live editor is below.

What's in this program

XICXIOOTEOTLOTU
  • 4 rungs

Instructions used: XIC (examine-if-closed contact (normally open)), XIO (examine-if-open contact (normally closed)), OTE (output energise coil), OTL (output latch coil), OTU (output unlatch coil).

Edit & run it live

Loading the interactive editor…

More example programs

Start/Stop motor with seal-in

The classic latching start/stop circuit. A momentary start button energises the motor, a parallel branch off the motor output seals the rung in, and a normally-closed stop button drops it out.

On-delay fan start (TON)

A run command starts an on-delay timer; once the preset elapses, the fan output turns on. A textbook TON example showing how the Done bit gates a downstream coil.

Batch counter with compare

Each part pulse increments a count-up counter; a compare instruction watches the accumulator and fires a Batch Complete output when it reaches the target. Shows CTU plus a CMP against a constant.

Want to build your own? Open the free ladder logic sandbox.